Replacing The Air Filter - Fayat Group BOMAG BRP 35/60 D Operating Instruction, Maintenance Instruction

Maintenance – Annually
Fig. 68
1
Fig. 69

8.9.3 Replacing the air filter

Fig. 70
80
7. Tilt the machine to the opposite side and secure it properly.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
8. Fill in new oil.
B-692-0010
9. Stand the machine horizontally and check the oil level.
ð Nominal value: Bottom edge of filling/drain bore.
10. Clean the bleed screw (1) and filling/drain plug (2) and screw
them in with a low-strength sealing agent (e.g. spare parts
number: 009 700 16).
2
11. Dispose of oil in line with environmental regulations.
B-692-0011
NOTICE!
Danger of engine damage!
–
Protective equipment:
1. Park the machine in secured condition
'Parking the machine in secured condition' on page 55.
2. Allow the engine to cool down.
3. Remove the cap (3).
4. Unscrew the knurled nut (2) and pull out the air filter (1).
5. Clean the cover.
BPR 35/60 D
Do not start the engine after having removed
the air filter.
n Working clothes
n Protective gloves
Ä Chapter 6.4