Table of Contents
Advertisement
Maintenance – Annually
Fig. 82
8.9.7 Replacing the starter rope
Fig. 83
Fig. 84
86
3.
Assemble covering (1) and air filter cover (2).
4.
After a short test run check the valve cover for leaks.
Protective equipment:
n
n
1.
Park the machine in secured condition
'Parking the machine in secured condition' on page 55.
2.
Allow the engine to cool down.
3.
Unscrew the fastening screws (1) and disassemble the recoil
starter (2).
4.
Pull the starter rope with the starter handle (1) out com-
pletely.
5.
Secure the coil (2) against winding up.
6.
Loosen the knot (3) in the starter rope and remove the old
starter rope.
7.
Carefully turn the coil back, until the recoil spring is relieved.
BPR 35/60 D
Working clothes
Protective gloves
Ä Chapter 6.4
Advertisement
Table of Contents
