Table of Contents
Advertisement
Fig. 85
Fig. 86
Fig. 87
Fig. 88
8.
Thread in the new starter rope and fix it with knots on both
ends .
A = 15 mm (0.6 in)
9.
Pre-tension the coil by approx. 4 rotations in direction of
arrow.
Thereby place the starter rope into the recess in the coil .
10.
CAUTION!
Danger of injury caused by the starter
handle hitting against your body!
–
Do not let the starter handle hit back.
Slowly guide the starter handle back to initial position .
11.
Pull the starter handle to check the function and light move-
ment of the recoil starter.
12.
Assemble the recoil starter (2) with fastening screws (1).
BPR 35/60 D
Maintenance – Annually
87
Advertisement
Table of Contents
