Assembly Of The Cover Seal; Repair - Lenze m500-P Series Operating Instructions Manual

Mounting the flange without additional screws
1. Apply the flange (6) to the end shield (15). Check pitch circle and thread of the
screw−on bore holes.
2. Mount the brake.
8.4.6

Assembly of the cover seal

1.2
1
10
13
Fig. 8 Cover ring mounting
1 Complete stator
2 Armature plate
6 Flange
1. Insert the cable through the cover ring.
2. Push the cover ring over the stator.
3. Press the lips of the cover ring into the groove of rotor and flange.
–
If a friction plate is used, the lip must be pulled over the flanged edge.
8.5

Repair

¯ We recommend having all repairs carried out by the Lenze customer service.
Lenze ¯ BA 33.0008 ¯ 5.0
15
12
KL458−010−a
10 Cheese head screw
27 Friction plate
13 Cover ring
Maintenance/repair
Assembly of the cover seal
1 2 13 27
15 End shield
8
Repair
10 1
13 6
5
KL458−007−a
53