Technical Data; General Data And Operating Conditions - Lenze m500-P Series Operating Instructions Manual

4

Technical data

4.1

General data and operating conditions

General data
Conformity and approval
Conformity
CE 2014/35/EU
2009/125/EC
2014/30/EU
TP TC 004/2011
EAC
(TR CU 004/2011)
TP TC 020/2011
EAC
(TR CU 020/2011)
Approvals
UL UL 1004−8
CSA CSA C22.2 No. 100
Energy Verified CFR Part 431.23
CSA C390−10
CCC GB Standard
12350−2009
The applicable approvals for the product you have ordered require labelling and are
specified on the nameplate.
Protection of persons and devices
Enclosure IEC/EN 60034−5
Temperature class F (155 °C)
IEC/EN 60034−1
Operating conditions
Ambient conditions
Climatic
Transport IEC/EN 60721−3−2
Storage IEC/EN 60721−3−1
Operation IEC/EN 60721−3−3
Site altitude
Humidity
Mechanical
IEC/EN60721−3−3
Lenze ¯ BA 33.0008 ¯ 5.0
Low−Voltage Directive
ErP Directive
Regulation No. 4/2014 and No. 640/2009 on the
ecodesign of electric motors
EMC Directive
On safety of low voltage Eurasian Conformity
equipment
TR CU: Technical Regulation of
Customs Union
Electromagnetic Eurasian Conformity
compatibility of technical
TR CU: Technical Regulation of
means
Customs Union
File No. E210321 Inverter Duty Motors
Motors and Generators
File No. E210321 Energy Efficiency Program for
Certain Commercial and
CC1278B
Industrial Equipment
Energy Efficiency Test
Methods for Three−Phase
Induction Motors
Safety requirements of small−power motors
See nameplate
Degrees of protection only apply to horizontal installation
All unused connectors must be closed with protection
covers or blanking plugs.
Exceedance of the temperature limit weakens or destroys
the insulation
2K3 (−20 °C ... +70 °C)
1K3 (−20 °C ... +60 °C) < 3 months
1K3 (−20 °C ... +40 °C) > 3 months
3K3 (−20 °C ... +40 °C) Without brake
With brake
3K3 (−10 °C ... +40 °C)
> +40 °C With power reduction, see
catalogue
< 1000 m amsl − without power reduction
> 1000 m amsl < 4000m amsl with power reduction, see
catalogue
Relative humidity £ 85 %, without condensation
3M6
Technical data
General data and operating conditions
4
19