Basic Setup - ABB TTF300 Operating Instruction

Field-mount temperature transmitter for all communications protocols, redundancy thanks to two inputs

Hide thumbs Also See for TTF300:

Table of Contents

TTF300 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF300-EN REV. G

Basic Setup

Note

Transmitter communication and configuration via HART,

PROFIBUS PA, and FOUNDATION Fieldbus H1 are described in

separate documentation ('Interface description').

The following configuration types are available for the

transmitter:

•

With DTM:

Configuration can be performed within an FDT frame

application that is approved for use with the DTM.

•

With EDD:

Configuration can be performed within an EDD frame

application that is approved for use with the EDD.

•

With FDI-Package (FIM):

Configuration is possible within an FDI frame applications

(Field Information Manager / FIM) for which the FDI

packages are released.

•

With LCD indicator Type A with operating buttons

Commissioning via the LCD indicator does not require any

tools to be connected to the device and is therefore the

simplest way of configuring the TTF300.

The general operation and menus of the LCD indicator are

described in Menu navigation on page 42.

Note

Unlike configuration using the DTM, EDD or FDI-Package (FIM)

the functionality of the transmitter can only be changed to a

limited extent with the LCD indicator.

Table of Contents