Instrument Power Supply - JRC AlphaWind AlphaLine Series Installation And Operation Manual

Wind repeater
Table of Contents

Advertisement

Figure 8: Grounding Bolt
Note The grounding strap must be as short as possible. If wire is used, use a minimum of 2.5 mm
See Figure 8: Grounding Bolt on page 15.
Note Always check the drawing for the correct shielding of signals.

1.1.10 Instrument Power Supply

The AlphaLine instrument has one 24 VDC (nominal) power input. Power consumption is approx. 500 mA. Connect to a
power supply > 1 A.
Note The power supply input is protected against connecting to the wrong polarity.
Note In rush current approximately 4 A.
15 | Installation Instructions
2
copper wire.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alphawind alphaline mfmAlphawind alphaline mfl

Table of Contents