Borg & Overström
General Safety
Install & Operation Manual
•
•
•
•
•
•
14
Always place the dispenser in its
vertical position, on a surface which
can capably support its weight.
During use this machine must remain
in its upright position.
Adequate ventilation must be
allowed for - we recommend using
the supplied ventilation ducting kit.
Keep the machine away from
sunlight, heat and moisture.
Power and water supply points must
be available near the dispenser,
and must meet the criteria specified
in the 'Specification' section of this
manual.
The environment where this machine
is installed must be free of dust and
corrosive/explosive gases.
GB