Borg & Overstrom T1 Tap systems User Manual

Advertisement

User Guide
T1 Tap systems
Dispense Options
Chilled
Ambient
Contents
Component/Feature Overview
Operation
Functions & Controls
General Safety
CO2 Bottle Installation
Fault Finding
01
Sparkling
NOTE: This booklet to be left with
appliance following installation
GB
Borg & Overström

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T1 Tap systems and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Borg & Overstrom T1 Tap systems

  • Page 1 User Guide T1 Tap systems Dispense Options Chilled Ambient Sparkling Contents Component/Feature Overview Operation Functions & Controls General Safety CO2 Bottle Installation Fault Finding NOTE: This booklet to be left with Borg & Overström appliance following installation...
  • Page 2: Major Components

    Component/ Feature Overview T1 Tap - Major Components Contents: 1 no T1 Tap with Control Panel 1 no 1.0m x 6mm Insulated Water Pipe 1 no Connector Cable Faucet 1 no Fixings Set Main Body Control Panel Mounting Threads & Fixing Plate Connector Cable Please Note:...
  • Page 3 ProCore™ Undercounter - Major Components Contents: 1 no ProCore Unit 1 no 2.0m Power Cord Set 1 no Co2 Regulator with Gauge & Connection tube* 1 no ProCore Simple-fit Ventilation Kit Top Panel Water Inlet Water Outlet Tap Connection CO2 Inlet* Unit Carry Handle On/Off Switch Side Panel...
  • Page 4 Front Panel ProCore Simple-fit Chimney ProCore Simple-fit Base...
  • Page 5: Connections Overview

    Operation & Connections Tap Control Panel Ambient Dispense Sparkling Dispense Chilled Dispense Basic Functions Dispensing from unit: Press and hold dispense icon and release to finish dispense. Connections Overview Outlet Pipe Tap connection cable CO2 Pipe Inlet Pipe CO2 Bottle...
  • Page 6: General Safety

    General Safety General Safety - Always place the dispenser in its vertical position, on a surface which can capably support its weight. - During use this machine must remain in its upright position. - Adequate ventilation must be allowed for - we recommend using the supplied ventilation ducting kit.
  • Page 7 CO2 Bottle Installation - Sparkling Versions Only Unpack CO2 Regulator and fit Attach the regulator to the Connect the assembled CO2 elbow fitting to spigot outlet. disposable CO2 bottle, ensuring bottle and regulator to the CO2 the pressure relief vent is facing inlet using a ¼”...
  • Page 8 For full distributor service manual visit: www.borgandoverstrom.com/manual/t1 Customer services: aftersales@borgandoverstrom.com call +44 1362 695 006 © Copyright Borg & Overström. This guide is printed by Borg & Overström and shall not be reproduced or copied in anyway. Ref: 702081 Version: V.26042022...

Table of Contents