System Description; Information Concerning The Device; Information Concerning The Software - IFM Electronic Ecomat 100 ecomatmobile SmartController CR2500 System Manual

ifm

System description

3 System description

Information concerning the device.............................................................................................11

Information concerning the software .........................................................................................11

PLC configuration ......................................................................................................................12
3.1 Information concerning the device
This manual describes the
microcontroller for mobile vehicles:
•
SmartController: CR2500, CR2501, CR2502
3.2 Information concerning the software
The controller operates with CoDeSys
In the "programming manual CoDeSys
programming system "CoDeSys for Automation Alliance". This manual can be downloaded free of
charge from ifm's website at:
→
www.ifm.com > Select country/language > [Service] > [Download] > [Control systems]
→ ifm-CD "Software, tools and documentation"
The application software can be easily designed by the user with the programming system CoDeSys
Moreover the user must take into account which software version is used (in particular for the
operating system and the function libraries).
NOTE:
The software versions suitable for the selected target must always be used:
•
of the operating system (CRnnnn_Vxxyyyzz.H86),
•
of the PLC configuration (CRnnnn_Vxx.CFG),
•
of the device library (CRnnnn_Vxxyyyzz.LIB),
• and the further files (→ chapter Overview of the files and libraries used, → page 275)
CRnnnn device article number
Vxx: 00...99 target version number
yy: 00...99 release number
zz: 00...99 patch number
The basic file name (e.g. "CR0032") and the software version number "xx" (e.g. "02") must always have
the same value! Otherwise the controller goes to the STOP mode.
The values for "yy" (release number) and "zz" (patch number) do not have to match.
Also note: the following files must also be loaded:
•
The for the project required internal libraries (designed in IEC1131),
•
the configuration files (*.CFG)
•
and the target files (*.TRG).
System Manual ecomatmobile
ecomatmobile controller family of
®
, version 2.3.9.1 or higher.
®
2.3" you will find more details about how to use the
SmartController (CR2500, CR2502) V05
ifm electronic gmbh
Information concerning the device
with a 16-bit
®
.
11