1. General
1.1 Function and features
The starter set for the control system ecomat 100 type R 360 is used to test
the ifm application software ecolog 100
easily installed. All required connections are prewired.
Please note:
Use in conjunction with controllers from other manufacturers can lead to
destruction of the controller or the I/O simulator box.
1.2 Components of the starter set
Controller ecomat R 360 (CR0501)
I/O simulator box incl. connection cable prewired with ...
– 5-pole AMP connector which can be latched,
protected against reverse polarity
– RS 232 D-SUB 9-pole miniature plug, socket
– 2-pole connector, (voltage supply)
– 5-pole M12 socket, (CAN bus)
Plug-in power supply, 230 V, 50 Hz / 24 V DC, 625 mA
CD-ROM with installation program for ...
– programming software "ecolog 100
– project examples and libraries
– manual for the program development ecolog 100
(in PDF format Acrobat Reader 3.0)
– system manual "ecomat 100 R 360"
(in PDF format Acrobat Reader 3.0)
– Adobe Acrobat Reader 4.0
Starter manual "ecolog 100
Catalogue "Industry-specific control systems ecomat 100"
1.3 System requirements
IBM PC or compatible
Microsoft Windows 95 (or higher)
16 MB RAM memory (or higher)
20 MB free memory space on the hard disk
(when completely installed, incl. Adobe Acrobat Reader 4.0)
1 free serial interface (RS 232)
CD-ROM drive
plus
. Hardware and software can be
plus
, version 2.1"
plus
"
R 360
STARTER SET
plus
PAGE
23