2�4 Removing And Installing The Power Supply Unit Module; Removing The Power Supply Unit; Installing The Power Supply Unit - AIC SB102-SP User Manual

SB102-SP User Manual
2�4 Removing and Installing the Power Supply Unit Module
2�4�1 Removing the Power Supply Unit
Step 1 Press the latch to release the module.
Step 2 Pull the handle to remove the module out of the system.
2�4�2 Installing the Power Supply Unit
Align and push the module into the system until it is hooked into the housing. Check
if the module is properly secured.
This information is provided for professional technicians only.
13
Chapter 2. Hardware Setup