Table of Contents
Advertisement
4.1
Undercounter installation requirements
Access panel/
door on counter
DOCKING STATION
• Position and screw louvered docking assembly to the bottom of counter inside of access panel/
door min. of 1.75" (45mm) from the front edge of the cross brace
• The mounting surface for the louvered docking assembly must be solid.
Do not mount directly onto runners or channels.
• There must be no lip or edge that would hinder the ice machine from sliding in or out of the
louvered docking station
• Ice machine must be installed facing forward as shown for service accessibility
8
Top View
➊
1.75" (45mm) min.
➋
24.5" min.
(623mm)
21" min.
(534mm
remote condensing
➌
No Lip
➋
➊
➌
DROP-IN • RIDE Technology
Advertisement
Table of Contents
