Ice Transport Tube - Follett Horizon Chewblet series Installation Instructions Manual

Install the ice transport tube.
5.1
Ice transport tube installation from dispenser to ice machine
Ice transport tube tips
• Insulate entire length of ice transport tube
• Secure ice transport tube
For long tube runs see guide on page 14.
• Pitch ice transport tube at least 1/4" per foot (6,4mm/.3m)
• Ice transport tube must drain towards ice machine
Ice transport tube to Ice machine
• Be sure tube ends are square
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
before making connection to ease assembly
• Push ice transport tube onto ice machine nipple
• Install hose clamp
DROP-IN • RIDE Technology
Hot Water
160 F (71 C)
➎
➏
➋
as needed to prevent dips and traps from forming.
➍
➐
remote condensing
➊
1/4"
➌
1'
➍
➐
➊
➌
➏

Ice transport tube

➋
Stock Module Identification Plate 208264
Module No.
Product
Service No.
5
➎
9