Mechanical Design; General - Siemens DF301 Basic Documentation

1
RDF301, RDF600KN,
RDF600KN/VB
RDF301.50,
RDF600KN/S
RDF301.50H
Siemens....................RDF301, RDF301.50..., RDF600KN, RDF600KN/VB, RDF600KN/S
Smart Infrastructure
7.

Mechanical design

7.1

General

The thermostats consist of 2 parts:
· Front panel with electronics, operating elements and built-in room temperature
sensor.
· Mounting base with power electronics.
The rear of the mounting base carries the screw terminals.
Slide the front panel in the mounting base and snap on.
2
1
4
3
RDF301.50, RDF600KN/S
1 Operating mode selector
2 Button for fan operation
3 Buttons to adjust setpoints and control parameters
4 Four buttons to control KNX actuators via KNX S-Mode
(functions: switching, dimming, blind control, 8-bit scene)
5 Four dedicated buttons for hotel functions (Make Up Room, Do Not Disturb)
via KNX S-Mode (functions: switching)
For operation, refer to section 4.3.
2
1
5
4
3
Basic Documentation
5
3
RDF301.50H
87 / 92
CE1P3171en
2020-02-21
2