Mechanical Design - Siemens RDF400 Series Manual

Mechanical design

Operation and settings
RDF300.../RDF340...
RDF600
RDF400...
RDF600T
Display
8/14
Siemens
Building Technologies
The thermostat consists of 2 parts:
· Front panel accommodating the electronics, operating elements and built-in room
temperature sensor.
· Mounting base with the power electronics.
The rear of the mounting base contains the screw terminals Slide the front panel in the
mounting base and snap on.
1
3
1
4
5
3
8
1
2
4
9
6
1. Operating mode
Protection
Auto Timer mode *
AUTO
Comfort
Economy
RDF300.../RDF340 / RDF400... / RDF600... Flush-mounted Room thermostats
1. Operating mode selector / Protection
2
2. Change fan operation
3. Adjust setpoint and control parameters
1. Change operating mode selector
2
2. Change fan operation
3. Adjust setpoint, control parameters and time
of day
6
4. Auto Timer program
5. Protection
7
6. Set time of day and weekday
7. Confirm
8. Infrared receiver
2. Display room temperature, setpoints and
8
control parameters.
3
temperature
3. Heating/cooling mode
5
4. Fan mode
7
5. Additional user information (RDF3xx) or
current time of day (RDF400 / RDF600T)
6. Weekday 1..7 (1 = Monday/7 = Sunday)*
7. Key lock active
8. Condensation in room
(dewpoint sensor active)
9. Indicate fault or reminder
* only on RDF400... / RDF600T
Symbol used to display the current room
Cooling mode
Heating mode,
Electrical heater active
Auto fan active
Fan speed low, medium, high
CE1N3076en
2018-12-27