Operation and settings
Siemens
Smart Infrastructure
6.
Mechanical design
6.1
General
The thermostats consist of 2 parts:
• Front panel with electronics, operating elements and built-in room temperature
sensor.
• Mounting base with power electronics.
The rear of the mounting base contains the screw terminals.
The base fits on a square conduit box with 60.3 mm fixing centers.
Slide the front panel in the mounting base and snap on.
1. Operating mode selector
2. Change fan operation
3. Adjust setpoints and control parameters
For operation, refer to section 4.3.
RDF302 Basic documentation
RDF302, RDF302/VB, RDF302.B
57 / 62
CE1P3079en
2022-06-17