Start -U P; Warranty - Schenker SMART 80 Installation, Use And Maintenance Manual

Digital 12/24 v dc

Table of Contents

2 - GENERAL WARNINGS & INFORMATION TO THE RECIPIENT

ATTENTION

Any technical changes or operating conditions indicated that affect the correct operation or

safety of the machine must only be carried out by the manufacturer's technical staff or by

technicians formally authorized by the manufacturer. Otherwise, SCHENKER ITALIA declines

any responsibility for changes or damages that may result from it.

2.3 Start-Up

The system SMART 80 test and validation takes place at the end of the assembly at Schenker Italia production

site.

The equipment and the relevant accessories are guaranteed 12 months from delivery. The guaran-tee does

not include consumable items (filters, carbon filters, membranes, etc.). The "ERS" pressure amplification

device is guaranteed 36 months, provided that the annual maintenance is per-formed at a Schenker service

point.

The guarantee covers faults, defect of materials and parts. It is limited to the replacement or re-pair of faulty

parts. The expense for the disconnecting and reinstalling on the vessel and transport of the equipment from or

to our Service Point, or our factory will be at the customers own expense.

The under guarantee delivered parts transport, will be at customer's own risk.

In case of repairs under guarantee performed by our technicians on the customer vessel, the faulty parts

replacement cost will be at Schenker's expense, while manpower and travel expenses will be charged to the

customer. The guarantee does not include faults caused by negligence in operating, maintenance and

installation of the device (if not carried out by an authorised Schenker Service point).

Dismantling by non-authorized personnel will render void all guarantees. Schenker Italia cannot be held liable

for any direct or indirect damage caused by the malfunctioning equipment, limiting its responsibility to the repair

and replacement of faulty parts.

ATTENTION

SCHENKER ITALIA declines any responsibility for improper use of the machine, for damages

caused as a result of operations not covered by this manual or unreasonable use.

THE PRESENT MANUAL BELONGS TO -

Schenker Italia

COD.

80S12/24.D.2018

Table of Contents