Table of Contents
Advertisement
6 – MAINTENANCE (ROUTINE AND EXTRAORDINARY)
8. Leave the unit running for approx. 20 minutes,
checking that the hoses are properly positioned in
the recipient, so that to avoid inhaling air.
9. Shut the plant off and connect the original hoses.
CAUTION
It is necessary to perform the first start-up procedure when restarting the plant after a shutdown
procedure, in order to purge the air and drain out board the chemicals in the systems.
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
46
COD.
80S12/24.D.2018
EN
Advertisement
Table of Contents
