Table of Contents
Advertisement
3 – PRODUCT PRESENTATION
Hydraulic Connection
Water inlet:
Water outlet:
Feed pump type:
Filters:
Power supply:
.
Average electric consumption:
Peak electric consumption:
Nominal fresh water production: 80 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
Fresh water quality:
CEE conformity:
3.6 Characteristic of the product
The machine uses sea water to produce fresh water.
The water produced by the Schenker plant, starting from clean sea water, is potentially drinkable. The requisite
of potable water cannot be guaranteed, however, because in some parts of the system there may be a bacterial
charge, especially in the event of non-observance of the cleaning and storage procedures. Therefore, it is
suggested to avoid drinking the fresh water produced by the plant, if a UV sterilizer is not installed.
ATTENTION
Do not drink fresh water produced by the watermaker if a UV sterilizer system is not installed.
THE PRESENT MANUAL BELONGS TO -
¾'' fitting, 16mm internal diameter rinforced hose.
¾'' fitting, 16mm internal diameter rinforced hose.
Rotary vane pump
n. 1 Cartridge filter 5 microns 2.32" x 9 ¾''
n. 1 Active carbon filter 2.32" x 9 ¾''
12 VDC +/- 15% (80S12 version)
24 VDC +/- 15% (80S24 version)
380 Watt/h average
500 Watt
Under 500 ppm TDS average
In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
Schenker Italia
12
COD.
80S12/24.D.2018
- ALL RIGHTS RESERVED
EN
Advertisement
Table of Contents
