D-Link DCS-4605EV User Manual page 63

Section 3: Configuration
Enter the type of authentication used by your read-only SNMP server.
Authentication
Type:
Enter the authentication password used for your read-only SNMP server.
Authentication
Password:
Enter the encryption password used for your read-only SNMP server.
Encryption
Password:
Enable or disable sending of traps by the camera.
Traps:
Enter the IP address of the SNMP server/management station where the trap
Trap Address:
messages will be sent.
Enter a trap community string used by your SNMP server.
Traps
Community:
Enter a second IP address of the SNMP server/management station where
Trap Address 2:
trap messages will be sent.
Enter a second trap community string used by your SNMP server.
Trap
Community 2:
D-Link DCS-4605EV User Manual 63