Configuration; Using The Configuration Interface - D-Link DCS-4605EV User Manual

Section 3: Configuration

Configuration

Using the Configuration Interface

After completing the Camera Installation Wizard, you are ready to use your camera. The camera's built-in Web configuration utility is designed to
allow you to easily access and configure your DCS-4605EV. At the end of the wizard, click Link, or enter the IP address of your camera into a web
browser, such as Firefox. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password,
the default password is blank. After entering your password, click OK.
Step 1
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu (Start
> D-Link > Setup Wizard SE).
Step 2
Select the camera and click Link to access the web configuration.
The Setup Wizard will automatically open your web browser to the IP address of the camera.
D-Link DCS-4605EV User Manual 23