Table of Contents
Advertisement
Section 2: Installation
Step 6
Loosen the adjustment screw on the side of the lens assembly, then re-tighten it after adjusting
the lens assembly to the desired vertical angle. The camera supports from 30° to 90° of tilt.
You can also adjust the pan within a -120° to 120° range by rotating it clockwise or counter-
clockwise.
When you are done adjusting the camera's angle, put the inner cover back into place.
Note: The camera has a limited range of motion; if it stops when you are adjusting it, do not
attempt to rotate or tilt the camera any further in that direction.
Step 7
Use the screws provided to mount the camera to the ceiling.
Step 8
Re-attach the camera cover.
D-Link DCS-4605EV User Manual
11
Advertisement
Table of Contents
Need help?
Do you have a question about the DCS-4605EV and is the answer not in the manual?
Questions and answers