Table of Contents
Advertisement
Section 2: Installation
Step 3
The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If
you have a DHCP server on your network, a valid IP Address will be displayed. If your network
does not use a DHCP server, the network camera's default static IP 192.168.0.20 will be
displayed.
Select your camera, then click the Wizard button to continue.
Step 4
Enter the Admin ID and password. When logging in for the first time, the default Admin ID is
admin with the password left blank.
Click the checkboxes if you wish to change the admin ID and password for the camera, and
enter the new ID and password you wish to use.
Click Next to continue.
D-Link DCS-4605EV User Manual
21
Advertisement
Table of Contents
Need help?
Do you have a question about the DCS-4605EV and is the answer not in the manual?
Questions and answers