Total Run Time Calculator; Easy Retrieve Program Memory - Hunter PRO-C PC Series Owner's Manual And Installation Instructions

HIDDEN FEATURES

Total Run Time Calculator

The Pro-C keeps a running total of each program's station run
times. This feature provides a quick way to determine how long
each program will water.
1. While in the RUN TIMES mode use the → button to advance
to the highest station position.
2. Press the →button once to review the total of all run times
programmed.
3. Use the PRG button to review additional programs.
Test Program
The Pro-C offers users a simplified method for running a test
program. This feature operates each station in numerical
sequence, from the lowest to the highest. You can start with any
station. This is a great feature to check the operation of your
irrigation system.
To initiate the test program:
1. Press and hold the PRG button. The station number will be
flashing.
2. Press the ← or→ button to scroll to the station you would like
the test program to start with. Use the + and - button to set a
run time of up to 15 minutes. The run time needs to be entered
only once.
3. After a 2-second pause, the test program will begin.
36
(CONTINUED)
Easy Retrieve
The Pro-C is capable of saving the preferred watering program
into memory for retrieval at a later time. This feature allows for a
quick way of resetting the controller to the original programmed
watering schedule.
To save the program into memory:
1. With the dial in the RUN position, press and hold the + and PRG
2. Release the + and PRG buttons.
To retrieve a program that was previously saved into memory:
1. With the dial in the RUN position, press and hold the - and
2. Release the - and PRG buttons.
Program Memory
™
buttons for 3 seconds. The display will scroll from left to right
across the display indicating the program is being saved into
memory.
PRG buttons for 3 seconds. The display will scroll from right
to left across the display indicating the program is being
retrieved from memory.