Connecting To The Hunter Solar Sync - Hunter PRO-C PC Series Owner's Manual And Installation Instructions

CONNECTING TO THE HUNTER SOLAR SYNC

The Solar Sync is a sensor system that, when connected
to Hunter Pro-C, will automatically adjust your controller
watering based upon changes in local climate conditions.
The Solar Sync utilizes a solar and temperature sensor
to measure on-site weather conditions used to determine
evapotranspiration (ET), or the rate at which plants and turf
use water. In addition, the Solar Sync sensor includes
a Hunter Rain-Clik® and Freeze-Clik® sensor that will shut
down your irrigation system when it rains and/or during
freezing conditions.
hunter.direct/procwifi
®
The controller will automatically increase or decrease watering
run times based on changes in weather. The result is a new
water-efficient irrigation product that promotes water
conservation and healthier plants. You simply program your
controller like you normally would, and the Solar Sync takes
over from there, eliminating the need to manually adjust your
watering schedule.
For installation and programming instructions of your Hunter
Solar Sync, please refer to the Solar Sync owner's manual
or visit the Solar Sync support section on our website:
https://hunter.direct/solarsynchelp
19