Specifications - Hunter PRO-C PC Series Owner's Manual And Installation Instructions

SPECIFICATIONS

Operating Specifications
• Station Count: Conventional wiring from 4 to 23 stations,
Two-wire EZ Decoder option up to 32 stations
• Station Run Time: 1 minute to 6 hours on programs
A, B, and C
• Start Times: 4 per program, three programs for up
to 12 starts
• Watering Schedule: 7-day calendar, interval watering up
to a 31-day interval or true odd or even day programming,
made possible by the 365-day clock/calendar
Electrical Specifications
• Transformer Input: 120 VAC, 60 Hz
(230 VAC, 50/60 Hz for international use)
• Transformer Output: 24 VAC, 1 amp
• Station Output: 24 VAC, 0.56 amps per station
• Maximum Output: 24 VAC, 0.84 amps
(includes Master Valve Circuit)
• Battery: 9-volt alkaline battery (not included) used
only for non-AC programming; the non-volatile memory
maintains program information
• Battery, front panel, internal CR2032 lithium for
real-time clock
Cabinet Dimensions
Height: 9" (23 cm)
Width: 10" (21.5 cm)
Depth: 4 1/ 2" (10.9 cm)
Outdoor cabinet is NEMA 3R, IP44 rated.
Default Settings
All stations are set to zero run time. This controller has a
non-volatile memory that retains all entered program data
even during power outages, without the need for a battery.
Cleaning
Clean only with cloth dampened with mild soapy water.
3