Table of Contents Table of Contents HPC - Upgrading Pro-C HPC - Using Hunter Remotes Wiring Operation Lightning Transformers with Controllers HPC- WRCLIK and HC Flow Meter Copyright 2020 Hunter Industries. All Rights Reserved.
2. Press down on the white hinge release button. 3. Remove face panel. Install HPC-FP Face Panel 1. Press blue hinges together and attach a new HPC panel. 2. Reconnect ribbon cable 3. Close and turn the power on STEPS Copyright 2020 Hunter Industries. All Rights Reserved.
Roam and Roam XL remotes for quick on-site management. HCC is also compatible with Hunter’s ROAM and ROAM XL remotes, allowing for fast and reliable manual operation in the field from long-range distances without the need for a smartphone. There is no need to remove the smart port adapter from the controllers when doing a facepack upgrade.
Operation The ROAM System will allow you to remotely turn on and off any station on your Hunter controller with the press of a button. Once on, the station will run for the run time you have designated in the remote.
Page 6
Two station outputs will operate at a If using PUMP or master valve, this time. Any two programs will run station output must be set to OFF in the simultaneously (lighting program and programming. irrigation program). Copyright 2020 Hunter Industries. All Rights Reserved.
Figure 1. AC 1/ AC 2 WRCLIK Yellow Figure 2. COMMON WRCLIK White Figure 3. Valve Common WRCLIK Blue Figure 4. Flow meter - Blue/White METER Blue/White Right Click to View Larger image Copyright 2020 Hunter Industries. All Rights Reserved.
Page 8
Copyright 2020 Hunter Industries. All Rights Reserved.