Setting A Watering Schedule - Hunter PRO-C PC Series Owner's Manual And Installation Instructions

SETTING A WATERING SCHEDULE

1. Turn the dial to the WATER DAYS position.
2. The display will show the last program selected (A, B,
or C). You can switch to another program by pressing the
PRG button.
3. The controller displays currently programmed active day
schedule information. You can choose to water on specific
days of the week, or you can choose interval watering, or
choose to water on odd days or even days. Each program can
operate using only one type of water day option.
Selecting Specific Days
of the Week to Water
1. Press the + button to activate
a particular day of the week to
water (the display always starts
with Monday). Press the - button
to cancel watering for that day.
After pressing a button, the
display automatically advances
to the next day. A icon indicates
a water day. A icon indicates a
no water day.
2. After programming, set the
dial to the RUN position to
enable automatic execution
of all selected programs
and start times.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering
instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.;
even days: 2nd, 4th, 6th, etc.)
cursor on SUN in specific days of the week mode
1. With the
press the → button once. ODD will flash on the screen.
2. If even day watering is desired, press the - button once. EVEN
will flash on the screen. You can move back and forth from
ODD to EVEN by pressing the - button.
3. Once you selected odd or even day watering, turn the dial
back to the RUN TIMES position.
NOTE: The 31st of any month and
February 29th are always "OFF" days
if Odd day watering is selected.
27