Using The Pro-C To Operate Outdoor Lighting - Hunter PRO-C PC Series Owner's Manual And Installation Instructions

USING THE PRO-C TO OPERATE OUTDOOR LIGHTING

Connecting the FX Luminaire Transformer
The Pro-C is capable of operating three separate lighting
transformers equipped with the PXSync interface box.
Connect wires from the first PXSync box to station output 1
(and the Common) on the Pro-C terminal. If using a second or
third transformer, the second will be wired to station 2 and the
third wil be wired to station 3.
NOTE: Manual cycles initiated at the
controller or from a remote will cancel
any automatic program currently
running. Once manual cycle is complete,
the controller will return to automatic
mode, and run the next scheduled
program at its specified start time
(OPTIONAL)
Transformer
Accessory Plug
31