Scanning Takes A Long Time; Index; Introduction; Scanner - Fujitsu fi-65F Operator's Manual

Chapter 6 Troubleshooting

Scanning takes a long time.

Does your computer meet the recommended
requirements?
Yes
Is the USB cable connected to the USB 1.1 port?
No
Did you start a scan while the computer was unstable (for
example, immediately after computer start-up or logon)?
No
Use a computer that meets the recommended CPU, memory, and other
requirements.
No
For details, refer to "System Requirements" in Getting Started.
You can check the type of the USB port that the USB cable is connected to by
selecting [Interface] → [Currently connected interface] in [Device Info] of the
Yes
Software Operation Panel.
Connect the USB cable to the USB 2.0 port.
When you start or log onto the computer, wait a while before starting a scan.
Yes
If the problem persists, check the items in
Service Provider" (page 52)
authorized FUJITSU scanner service provider.
"6.2 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents

Index

Introduction

Scanner

Overview

How to Scan

Documents

Configuring the

Scan Settings

Various Ways to

Scan

Daily Care

Troubleshooting

Operational

Settings
Appendix
Glossary
43