Functions In The Options Menu; What This Chapter Contains; Options Menu - ABB AC-AP Series User Manual

Functions in the Options
menu

What this chapter contains

The chapter describes functions in the Options menu.

Options menu

In the Options menu, you can control the settings
related to the Home view.
Note: The contents displayed may vary based on
the drive/device to which the panel is connected.
The menu shown is only an example.
The Options menu has the following sub-menus:
Sub-menu
Reference
Direction change
Select drive
Edit Home view
Active faults
Active warnings
Function
Set the reference value by using
when you save them with a key press
(page 50).
Change the direction of the motor rotation in local control mode.
Enable or disable the panel bus. If enabled, view the status of drives in
the panel bus and select which drive to control with the control panel.
See chapter Control of multiple drives
Edit the contents of the Home view. See
Home view (page 50).
View an active faults. See chapter
View an active warnings. See chapter

Functions in the Options menu 49

6
.
and The changes take place
.
See Setting the reference
(page 53).
Editing the contents of the
Fault tracing (page 57).
Fault tracing (page 57).