Right Softkey; Arrow Keys; Start And Stop - ABB AC-AP Series User Manual

Control panel overview 21

Right softkey

The right softkey ( ) is usually used for selecting, accepting and confirming. The
function of the right softkey in a given situation is shown by the softkey selection in
the bottom right corner of the display.

Arrow keys

The up and down arrow keys ( and ) are used to highlight selections in menus
and selection lists, to scroll up and down on text pages, and to adjust values when,
for example, setting the time, entering a passcode or changing a parameter value.
The left and right arrow keys ( and ) are used to move the cursor left and right in
parameter editing and to move forward and backward in assistants. In menus, and
function the same way as and , respectively.
Help
The help key ( opens a help page. The help page is context-sensitive, in other
? )
words, the content of the page is relevant to the menu or view in question. See Help
(page 28) for more information on the help page.

Start and Stop

In local control, the start key ( ) and the stop key ( ) start and stop the drive,
respectively.
Off
In Hand and Auto control, the Off key ( ) is used to stop the drive.
Hand
The Hand key ( ) is used to start the drive in local mode. When the drive is
running, if you switch to Auto mode, the drive changes the control location to Remote
mode and the drive may stop.
Auto
The Auto key ( ) is used to run the drive automatically. The control is selected
from primary or secondary or any DI. You can give the reference inputs in Menu ->
Primary settings -> Drive or by setting the values in parameter groups 19 and 20.
Loc/Rem
The location key ( ) is used to switch the control between the control panel
Loc/Rem
(Local) and remote connections (Remote). When switching from Remote to Local
while the drive is running, the drive keeps running at the same speed. When
switching from Local to Remote, the status of the remote location is adopted. See the
drive-specific firmware manual for more details.