Functions in the Options
menu
What this chapter contains
The chapter describes functions in the Options menu.
Options menu
In the Options menu, you can control the settings
related to the Home view.
The Options menu has the following sub-menus:
•
Reference: Set the reference value by
and
using
when you save them with a key press
. See
Setting the reference
•
Direction change: Change the direction of the motor's rotation in local control
mode.
•
Select drive: Enable or disable the panel bus. If enabled, view the status of
drives in the panel bus and select which drive to control with the control panel.
See chapter
•
Edit Home view: Edit the contents of the Home view. See
contents of the Home view
•
Active faults: View an active faults. See chapter
•
Active warnings: View an active warnings. See chapter
51).
.
The changes take place
Control of multiple drives
(page 44).
Functions in the Options menu 43
44).
(page
(page 47).
Fault tracing
6
Editing the
(page 51).
Fault tracing
(page