System Menu - ABB CP420 Installation And Operation Manual

7.2

System Menu

Set the dip switch SW7 = ON. After the self-test, the system menu of the oper-
ator terminal is displayed on the screen:
The functions of the commands are briefly explained below:
System menu
command
Link
F2 - Confg
F3 - Copy
F4 - Set
F5 - Run
ABB, 1SBC159102M0201
The operator terminal is connected.
Sets up the internal time clock and communication parameters
in the operator terminal. All the settings has to made for the
operator terminal to work properly.
Use , , and
the value of the field.
Copies application data to another CP420.
Adjusts touch panel LCD contrast.
See also section 6 LCD Contrast
Runs the application.
Function
to move to desired field; + and - to set
Adjustment.
Operation
17