I/O; Diagnostics - ABB AC-AP Series User Manual

46 Functions in the main Menu
Sub-menu
PID
Fieldbus
Advanced options/
functions
Clock, region,
display
Reset to defaults

I/O

In the I/O menu, each row provides terminal name,
number, electrical status and logical meaning of
the drive. Each row also provides a sub-menu that
provides further information on the menu item and
allow you to make changes to the I/O connections.

Diagnostics

The Diagnostics menu provides diagnostic
information, such as faults and warnings and helps
you to resolve potential problems. Use the menu
to make sure that the drive setup is functioning
correctly.
Note: The contents displayed may vary based on
the drive/device to which the panel is connected,
and the menu shown is only an example.
Sub-menu
Start, stop,
reference, summary
Limit status
Active faults
Active warnings
Active inhibits
Fault & event log
Function
Set up the settings and actual values for the process PID controller. PID
is only used in remote control.
To make the protocol configurations easier.
Contains settings for advanced functions, such as triggering or resetting
faults through I/O, or switching between entire set of settings.
Contains settings for language, date and time, display (such as
brightness) and settings for changing how information is displayed on
screen.
Enables you to reset the Home view to its original factory state.
Function
Shows where the drive is currently taking its start, stop commands and
reference. The view is updated in real time. If the drive is not starting or
stopping as expected, or runs at undesired speed, use this view to find
out where the control comes from.
Describes any limits currently affecting operation. If the drive is running
at undesired speed, use this view to find out if any limitations are active.
Shows the currently active faults and provides instructions on how to fix
and reset.
Shows the currently active warnings and provides instructions on how to
fix and reset.
Shows the currently active inhibits. The drive cannot start. Drive is not
parameterized correctly.
Lists the faults, warnings and other events that have occurred in the
drive.