Creating A Parameter Backup; Restoring A Parameter Backup - ABB AC-AP Series User Manual

42 Functions in the main Menu
Some of the Backup icons are listed below:


Creating a parameter backup

1. In the Backups menu, select Create backup.
If there is a free backup slot in the control panel,
the following step is skipped.
2. Use and
backup files, and press Replace.
3. Wait until the backup is completed. An animation
is shown on the control panel during the backup
process. The control panel automatically returns
to the Backups menu.
Note: If the backup process is canceled or
interrupted, the previously saved backup file is not
deleted or damaged. Thus, if you accidentally start a
backup process, you can safely cancel it before its
completion.


Restoring a parameter backup

1. In the Backups menu, select the backup file you want to restore.
2. Select View backup contents and check that it is the correct backup file and that
it is suitable for restoring.
Note: This functionality is available in a future release.
3. Select one of the restore options:
• To restore all settings, select Restore all
parameters.
• To restore a set of parameters, select
Select par restore group and select the
desired parameters from the list, and then
select Restore.
• To select application parameters, select
Select application items and select the desired parameters from the list and
then select Restore.
• To select user parameters sets, select Select user sets and select the desired
user set from the list and then select restore.
to select one of the existing