Low Noise Mode Time Setting; Advanced Fan Speed "Auto" Setting - LG PREMTB100 Owners & Installation Manual

FUNCTION SETTING
80

Low noise mode time setting

It is the function to set the start and end time of the outdoor unit's low noise mode operation.
• In the function setting list, select the Low Noise Mode Time category, and press [OK] button to
move to the detail screen.
- After setting the start time and the end time, press [OK] button to move to the upper level
list.
- If the start time and the current time are the same, it enters the outdoor unit low noise opera-
tion mode, and in the monitoring screen, 'in outdoor unit low noise operation mode' message
is displayed.
- If the end time and the current time are the same, the outdoor unit low noise operation mode
is cleared.
NOTE
!
Low noise mode time setting function can be set only when the installer setting's outdoor
unit function M/S setting is set to "Master".
Low noise mode time setting function is only available in some products.
CAUTION
!
If the function is not used, please set it to Off.
When you enter the low noise operation, the cooling capacity may be degraded.
OK

Advanced fan speed "Auto" setting

It is the function to set the indoor unit's temperature based auto fan usage.
It is the function to automatically change the fan speed according to the difference between the
indoor temperature and the desired temperature.
• You can set the following setting values using [<,>(left/right)] button.
Value
Set Change the fan speed automatically
Clear Do not change the fan speed automatically
NOTE
!
Advanced fan speed "Auto" setting function is only available in some products.
FUNCTION SETTING
Description
81