Check Room Temperature; Wind Setting; Fan Speed Control; Fan Speed Control - Ventilation - LG PREMTB100 Owners & Installation Manual

TEMPERATURE SETTING
22

Check Room Temperature

You can check the current indoor temperature.
• In the remote controller's the main screen, you can check the indoor temperature.
NOTE
!
The temperature distribution in the remote controller installation space is not uniform, so
there can be a little difference between the temperature you actually feel and the remote
controller's room temperature display
According to Control type setting value
• Single setpoint
Fahrenheit: 52~99 °F
- below 52 °F: display 'LO'
- over 99 °F: display 'HI'
Celsius: 10.5~39.5 °C
- below 10.5 °C: display 'LO'
- over 39.5 °C: display 'HI'
• Dual setpoints
Fahrenheit: 34~99 °F
- below 34 °F: display 'LO'
- over 99 °F: display 'HI'
Celsius: 0.5~39.5 °C
- below 0.5 °C: display 'LO'
- over 39.5 °C: display 'HI'
- For indoor temperature below 50 °F (10 °C), the value perceived by the Thermostat(with
cable) is displayed.
• Because of location of Temperature sensing, the real room temperature and the this
displayed value can be different.

WIND SETTING

Fan speed control

From the main screen, press [<,>(left/right)] button to select the fan speed category, and press
[∧,∨(up/down)] button to set the fan speed control the desired fan speed.
- It circulates in the order of Slow ↔ Low ↔ Medium ↔ High ↔ Power ↔ Auto.
※For some product some fan speed may not be available.

Fan speed control - ventilation

You can easily control the desired fan speed.
• In the main screen, press [<,>(left/right)] button to select the fan speed category, and press
[∧,∨(up/down)] button to set the fan speed.
- It circulates in the order of low ↔ high ↔ power ↔ auto.
※The auto Fan can be used only when the air contamination (CO
Air flow control
You can easily control the desired air flow
• In the main screen, press [<,>(left/right)] button to select the air flow category, and press
[∧,∨(up/down)] button to set the air flow.
- It circulates in the order of Off ↔ Up/Down swing ↔ Left/Right swing ↔ Up/Down/Left/Right
swing ↔ Swirl ↔ Indirect wind ↔ Direct wind ↔ Human detection direct wind ↔ Human de-
tection indirect wind ↔ Smart mode ↔ Refresh mode.
※For some product some air flow settings may not be available.
WIND SETTING
23
) sensor is installed.
2