Auto Esp (Air Conditioner) - LG PREMTB100 Owners & Installation Manual

INSTALLER SETTING
154

Auto ESP (air conditioner)

This function automatically sets the rotation speed of the fans corresponding to each step of
rated airflow for easy installation.
• Select Auto ESP and press the [OK] button to move to the detail screen.
After selecting the voltage setting, the product will automatically operate and automatically set
the rotation speed for each fan speed - High, Medium, and Low.
Check the product type and select "Auto" for a Single product and "Manual" for a Multi V prod-
uct.
Value
Off Not in use
Auto Automatically selects the voltage
Selects the voltage (190V-270V)
Manual
* Only for Multi V products
OK
Description
While setting, a pop-up is displayed. This means that Auto ESP is being set.
(It takes approximately 3 to 8 minutes.)
Product operation is terminated once the rotation speed setting is complete.
You can check the results as Pass or Fail.
If it fails, you cannot use the Auto ESP function.
Instead of Auto ESP, the conventional ESP setting method can be used.
NOTE
!
If Auto ESP is incorrectly set, the air conditioner may malfunction.
This function must be set by an installation specialist with an installation license.
INSTALLER SETTING
155