FUNCTION SETTING
76
Home Leave Set Temperature Setting
Home Leave Set Temperature function is used in Dual Setpoint Control mode.
When customer operate as home leave mode, this setting temperature value will be applied.
NOTE
!
Home Leave Set Temperature function can only be used in a dual setpoint control mode.
OK
Comfort cooling setting
It is the function to set the outdoor unit Comfort saving operation value.
• You can set the following values using [<,>(left/right)] button.
NOTE
!
The Comfort cooling function does not work in the group control.
Comfort cooling setting function is only available in some products.
ODU Refrigerant Noise Reduction setting
It is the function to set the outdoor unit's refrigerant noise reduction function.
• You can use [<,>(left/right)] button to set the following setting values as follows.
Value
Step 0
Not use
Step 1
Outdoor unit noise mode 1
Step 2
Outdoor unit noise mode 2
NOTE
!
The ODU Refrigerant Noise Reduction function can be set only when the installer setting's
outdoor unit function M/S setting is set to "Master".
ODU Refrigerant Noise Reduction function is only available in some products.
FUNCTION SETTING
Value
Step 1
Step 2
Step 3
Description
77