INSTALLER SETTING
124
Static pressure setting(air conditioner)
Static pressure setting can be set only in the duct products. (It cannot be set in other products.)
• You can set the following setting values using [<,>(left/right)] button.
Static pressure
Variable high static pressure
V-H
Fixed high static pressure
F-H
Variable low static pressure
V-L
Fixed low static pressure
F-L
• 2TH function's operation characteristics may be different for each product.
Description
Variable / Fixed
ESP default value
Variable
High static pressure(High)
Fixed
High static pressure(High)
Variable
Low static pressure(Low)
Fixed
Low static pressure(Low)
Remote controller master / slave setting
(air conditioner / General, DX ventilator)
This function sets configuration for the master/slave setting through the remote controller.
• Change setting values using [<,>(left/right)] button.
M/S
Using group control, the indoor units are operated based on the re-
Master (default)
mote controller.
Using group control, all remote controllers except 1 master remote
Slave
controller are set as slaves.
• 2TH function's operation characteristics may be different for each product.
INSTALLER SETTING
125
Description