Welch Allyn 300 Series Directions For Use Manual page 23

Directions for Use
Use the configuration menu to select and set the following parameters:
Time and Date
MAP Measurement
Blood Pressure
Measurement Units
Print Mode
To change a configuration parameter:
1. Select the parameter as indicated above.
2. Change the value by pressing
3. Set the displayed new value either by doing nothing for 10 seconds or by pressing any
button other than
returns to normal operation with that function (
hour
minute
year
month
day
Enabled
Disabled
mmHg (millimeters of mercury)
kPa (kilopascals)
Batch
Stream
or .
or . If you press a function button (such as
Chapter 2 Setup
), the monitor
) activated.
19