Welch Allyn 300 Series Directions For Use Manual page 21

Directions for Use
Use the settings menu to select and set the following parameters:
Patient Type
Target Pressure
Temp Modes
Pulse Tone Volume
To change a settings parameter:
1. Select the parameter as indicated above.
2. Change the value by pressing
3. Set the displayed new value either by doing nothing for 10 seconds or by pressing any
button other than
returns to normal operation with that function (
Neonate Term birth through 28 days, or up to 44 gestational weeks
Pediatric 29 days through 12 years
Adult 13 years and older
The initial cuff inflation pressure (set individually for each patient type)
Fahrenheit Predictive
ºF ºF
Fahrenheit Monitored
ºF ºF M M
Celsius Predictive
ºC ºC
Celsius Monitored
ºC ºC M M
From 0 (silent) to 5 (loudest)
or
or . If you press a function button (such as
.
) activated.
Chapter 2 Setup 17
), the monitor