Table of Contents
Advertisement
4.3 Installation
The IR Arctic Box Camera is designed for outdoor use. Follow the steps
below to install your camera.
IMPORTANT: The gel bag loses its effectiveness when the dry camera
is opened. To prevent the lens from fogging up, you must replace the
silica gel bag every time you open the camera and conceal the silica gel
bag in the camera within 2 minutes of exposing to open air.
1.
Mark the installation site and drill four holes for screw anchors.
2.
Insert the supplied screw anchors.
3.
Secure the camera to the wall using the supplied washers and screws.
4.
Connect the camera with wires and cables. See 4.4 Connecting the
Camera in the Quick Start Guide.
5.
Access the live view. See 22.2 Accessing the Live View in the Quick
Start Guide.
4
IR Arctic Box Camera
23
Advertisement
Table of Contents
