Voice Calling To A Fixed Destination; Voice Calling In A Group; Voice Calling To A Variable Destination - Siemens optiPoint 500 economy User Manual

Step by Step
E
Enter the code!
Using HiPath 4000 as an intercommunication system

Voice calling to a fixed destination

The system code-number for "voice calling" + the desti-
nation call number is programmed onto a repertory key
(Æ page 58).
Press the programmed repertory key. A connection to
the destination loudspeaker is immediately set up.
The other functions are the same as those for "Voice
calling to a variable destination" on page 86.

Voice calling in a group

A normal connection within a group or team (for team
call = speed-calling number for team members 0 to 9 or
00 to 99) can also be set up via Voice calling. To do this,
voice calling is initiated from a group telephone.
The "voice calling in the group" function is line-in-
dependent - anyone can voice call anyone else.

Voice calling to a variable destination

C
Lift the handset.
or With the handset cradled: Handsfree talking (you can-
not use this function with optiPoint 500 economy/ba-
sic).
Enter the system code-number for "voice calling in the
group" and
E
the speed calling code for the group member in ques-
tion.
or
Press the key for "voice calling in the group" (must be in-
stalled)
and
E
the speed calling code for the group member in ques-
tion.
87 87 87 87