Relocating With The Telephone; Disconnecting The Telephone From Its Present Station Line; Reconnecting The Telephone At The New Station Line - Siemens optiPoint 500 economy User Manual

Relocating with the telephone

Step by Step
E
Enter the code!
E
Enter the code!
84 84 84 84
Relocating with the telephone
Check with your system administrator whether this is
possible with your telephone system.
After consulting with your system administrator,
you can log off your telephone from its present station
line and then log it on at the new station line. Note that
the settings on your telephone (programmed keys) are
not affected by the move.
Disconnecting the telephone from its
present station line
Enter the code for logging off. If you are not sure of the
code, check with your system administrator.
E
Enter PIN.
Remove the telephone line cord from the jack.
Reconnecting the telephone at the
new station line
Insert the telephone line cord in the jack.
Enter the code for logging on. If you are not sure of the
code, ask with your system administrator.
E
Enter PIN.
If you relocate with both a first and a second tele-
phone (for example, executive/secretary configu-
ration), you must first log off from the second
telephone, then the first telephone. At the new
location, you log on the first telephone first, then
the second telephone (Not applicable in the US).