Parking Via "System Parking" (Only Telephones Without A Display); Taking A Parked Call - Siemens optiPoint 500 economy User Manual

System-wide parking (HiPath 4000)
Step by Step
System parking
E
Enter the code!
System parking
40 40 40 40
Parking via "system parking" (only
telephones without a display)
Press key (must be installed).
9 B
... Enter and note a parking position number (0 to 9).
The call has been parked.
I
Replace the handset.

Taking a parked call

Via the keypad
C
Lift the handset or use the speakerphone function.
Enter the system code for "system parking" (if you have
any problems ask your system administrator).
9 B
... Enter the parking position number (0 to 9) you have not-
ed and continue the call.
Via the repertory key
C
Lift the handset or use the speakerphone function.
Press the repertory key programmed with the system
code + parking position number and continue call.
or
Press the repertory key programmed with the system
code.
9 B
... Enter the parking position number (0 to 9) you have not-
ed and continue call.
Via "system parking" (only for telephones with no
display)
C
Lift the handset.
Press key (must be installed).
9 B
... Enter the parking position number (0 to 9) you have not-
ed and continue call.