Advice For Users; Care Of The Telephone; Troubleshooting - Siemens optiPoint 500 economy User Manual

Advice for users

Step by step
118 118
118 118
Advice for users

Care of the telephone

• Use either a damp cloth or an antistatic cloth to
clean the telephone. Never use a dry cloth!
• If the telephone needs to be cleaned thoroughly,
use a neutral, diluted, surface-active cleaning agent.
Ensure that all traces of the cleaning agent are re-
moved with a damp cloth (using water only!).
• Never apply a cleaning agent that contains alcohol or
that is liable to harm plastic surfaces; never use an
abrasive cleaning powder.

Troubleshooting

There is no response after a key has been pressed:
Check whether the key has become stuck.
No ringing tone when an incoming call is received:
Check whether you have activated the Do Not Disturb
function (Æ page 22). If you have, cancel this function
to receive calls again.
You cannot dial a number:
Check whether you have locked the telephone
(Æ page 54). If you have, unlock the telephone to make
calls again.
The time shown on the display is not correct:
After 24 hours at the latest, the time is corrected auto-
matically (overnight).
All other faults:
First contact your system administrator. If the fault can-
not be eliminated, Customer Service must be called in.