Cancelling The Station Fixed Call Forwarding Destination; Deactivating Call Forwarding For A Line - Siemens optiPoint 500 economy User Manual

Making multiline calls
Step by Step
Line
program/service
Destinations?
Fixed call forw.?
Delete?
Line
Call forwarding
program/service
Feature settings?
102 102
102 102
Cancelling the station fixed call forwarding
destination
Precondition: The telephone is in the idle state. A sta-
tion fixed forwarding destination has been saved
(Æ page 101).
Only if it is not your primary line:
Press the line key for the required line.
Press the key. The lamp lights up.
for Hicom 300 E/H (not used in US)
:;
Enter the service code.
or
Confirm.
Select and confirm.
If a fixed destination has been stored, it is displayed.
and
Select and confirm.
for HiPath 4000
The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see Æ page 68.

Deactivating call forwarding for a line

Precondition: The telephone is in the idle state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the call forwarding key:
Press the key. The lamp goes out.
Via the program/service key:
Press the key. The lamp lights up.
;>
Enter the service code.
or
Select and confirm.